Tuesday, April 21, 2015

21/04/2015: See Dinnissen’s new Pick-Up device for vacuum conveying at Achema and Victam


Constant inflow of powders, particles, and granulates in vacuum conveying
Dinnissen Process Technology has developed a new pneumatic Pick-Up device for providing a constant inflow of powders, particles, and granulates in vacuum conveying systems. The Pick-Up works completely automatically on the basis of the transport pressure that has been set. Mechanical dosage devices such as sluice valves or screws are superfluous. Dinnissen’s new Pick-Up plays a crucial role in its innovative Slow Flow Conveying systems which can be used to pneumatically transport even the most fragile, sticky, and soft products quickly, easily and effectively. 
  
http://www.dinnissen.nl/


Problem-free transport of fragile, sticky, and soft products

Slow Flow Conveying is the pneumatic conveying system developed by Dinnissen especially for the transport of fragile, sticky, and soft products. Slow Flow Conveying works according to the principle of underpressure or overpressure transport. Powders, particles, or granulates are transported from one or more inflow points to a single compact receiving unit with the help of a controlled flow of air or gas. In Slow Flow Conveying, it’s crucial to minimise the friction between the product particles in order to ensure that fragile, sticky, or soft products are transported as efficiently and gently as possible. To realise this, the transport speed is minimised, and the ratio between the amount of product being transported and the amount of transport air or gas used is relatively high. In order to carefully and gently transport fragile ingredients, it’s also crucial to ensure a constant supply of product to the conveying system. After all, a constant supply rate results in a proper loading factor, a smooth production process, and an optimum end product quality.


Minimising product damage and mechanical maintenance

Dinnissen has developed a new Pick-Up for vacuum conveying systems to ensure that, regardless of the product in question, the product can be transported through the system at exactly the proper loading factor and speed. Dinnissen’s new Pick-Up plays an important role in its innovative Slow Flow Conveying system. The Pick-Up is fitted with an automatically regulated air supply for the inflow of products. This ensures that an optimum amount of transport air or gas is used for each product. Via the automatic valve, the precise capacity for one or more inflow products can be chosen on the basis of transport pressure. This means that the proper ratio between transport speed and loading factor can always be realised even for products with very different characteristics. This makes it possible to transport even the most fragile, sticky, or soft products easily and quickly and without the use of mechanical dosage devices, sluices, or screw transporters. The new pneumatic Pick-Up Device makes it possible to reduce product damage and mechanical maintenance to an absolute minimum. 


More information

Dinnissen Process Technology is presenting the new Pick-Up and its Slow Flow Conveying systems at Achema in Frankfurt from 15 to 19 June at its stand 5.0 D17 and at the Victam in Köln from 9 to 11 june at stand B 031. Slow Flow Conveying is one of the conveying systems in the range of products supplied by Dinnissen. In the area of bulk transport, Dinnissen is also specialised in Dense Phase and traditional air transport. Besides conveying systems, Dinnissen also supplies technologies and solutions for handling, weighing, mixing, grinding, sieving, and packaging bulk goods.  

Visit the website HERE.
 


The Aquaculturists
This blog is maintained by The Aquaculturists staff and is supported by the
magazine International Aquafeed which is published by
Perendale Publishers Ltd

For additional daily news from aquaculture around the world: aquaculture-news

No comments:

Post a Comment